Mercator Epsilon II 3600lm DIY Solar LED Streetlight for Shed, Barn, Horse Stable

COMMERCIAL GRADE Mercator Epsilon II 3600lm Solar LED Streetlight with IR Remote Controller.

This super practical LED solar light is perfect for off-grid lighting, patios, sheds, barn, horse stable, work stations, camp sites and more; basically anywhere there is no power. It has multiple different automatic working modes to suit all needs (see ‘Working Modes’ below).

DIY (do-it-yourself installation) Solar LED ‘Streetlight’. Features a super high quality 15w Mono-Crystalline Silicone Solar Panel powering an efficient LED panel with a built-in motion sensor. The solar panel is integrated on the top of the light. The Epsilon II comes with a 47cm mounting pole, bracket and Dyna bolts with washers – everything you need for your weekend warrior install!

IP65 weatherproof rated, meaning the Mercator Epsilon II 3600lm is built to withstand full exposure to the weather.

$0.00 running costs.

Built-in PIR security motion sensor can activate the light when movement is detected at night time. Sensor has a long (up to 10m*) and wide (120°) detection range, and has a manual-override ability allowing the user to bypass the sensor and keep the light on if necessary (called constant light mode) via the INCLUDED IR remote controller.

DIY installation – no electrician required.

3 year Australia-wide replacement warranty – for a solar DIY fitting! That’s true commercial grade stuff.

Specifications:

• DIY installation- no electrician required
• Lumens: 3600lm
• Dimmable: yes via remote
• IP65 weather resistance
• Colour Temperature: 6500K
• 120° beam angle
• 13W monocrystalline solar panel integrated
• Battery: 15Ah LiFePO4 – (battery is replaceable!)
• Max install height – 3-4 metres
• Charge time: 6 hours full sunshine
• Dimensions:
– Main Body: 620mm length x 240mm width x 54mm depth
– Mounting Pole: 470mm

Working modes:

Once the light is set and detects low ambient light……

• AUTO: Light will turn ON at 50% brightness for the first hour, 30% brightness for the next 3 hours, 15% brightness for the rest of the time
• 2H + SEN: Light will turn ON at 50% brightness for the first hour, 30% brightness for next 1 hour. After 2 hours, light will enter sensor mode, where the normal brightness is 5%. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.
• 4H + SEN: Light will turn ON at 50% brightness for the first hour, 30% brightness for next 1 hour and 15% brightness for the next 2 hours. After 4 hours, light will enter sensor mode, where the normal brightness is 5%. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.
• HL + SEN: Light will turn ON at 5% brightness. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.

For all modes except HL + SEN, you can adjust the brightness 50%-40%-30%-20%-15% by pressing the up and down arrow buttons on the remote.

MPN: MSL215

*depending on the environment and other factors.