COMMERCIAL GRADE Mercator Epsilon II 2000lm Solar LED Streetlight with IR Remote Controller.
This super practical LED solar light is perfect for off-grid lighting, patios, sheds, barn, horse stable, work stations, camp sites and more; basically anywhere there is no power. It has multiple different automatic working modes to suit all needs (see ‘Working Modes’ below).
DIY (do-it-yourself installation) Solar LED ‘Streetlight’. Features a super high quality 13w Mono-Crystalline Silicone Solar Panel powering an efficient LED panel with a built-in motion sensor. The solar panel is integrated on the top of the light. The Epsilon II comes with a 47cm mounting pole, bracket and Dyna bolts with washers – everything you need for your weekend warrior install!
IP65 weatherproof rated, meaning the Mercator Epsilon II 2000lm is built to withstand full exposure to the weather.
$0.00 running costs.
Built-in PIR security motion sensor can activate the light when movement is detected at night time. Sensor has a long (up to 10m*) and wide (120°) detection range, and has a manual-override ability allowing the user to bypass the sensor and keep the light on if necessary (called constant light mode) via the INCLUDED IR remote controller.
DIY installation – no electrician required.
3 year Australia-wide replacement warranty – for a solar DIY fitting! That’s true commercial grade stuff.
Specifications:
• DIY installation- no electrician required
• Lumens: 2000lm
• Dimmable: yes via remote
• IP65 weather resistance
• Colour Temperature: 6500K
• 120° beam angle
• 13W monocrystalline solar panel integrated
• Battery: 15Ah LiFePO4 – (battery is replaceable!)
• Max install height – 3-4 metres
• Charge time: 6 hours full sunshine
• Dimensions:
– Main Body: 620mm length x 240mm width x 54mm depth
– Mounting Pole: 470mm
Working modes:
Once the light is set and detects low ambient light……
• AUTO: Light will turn ON at 50% brightness for the first hour, 30% brightness for the next 3 hours, 15% brightness for the rest of the time
• 2H + SEN: Light will turn ON at 50% brightness for the first hour, 30% brightness for next 1 hour. After 2 hours, light will enter sensor mode, where the normal brightness is 5%. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.
• 4H + SEN: Light will turn ON at 50% brightness for the first hour, 30% brightness for next 1 hour and 15% brightness for the next 2 hours. After 4 hours, light will enter sensor mode, where the normal brightness is 5%. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.
• HL + SEN: Light will turn ON at 5% brightness. If it detects movement, the light will turn ON at 100% brightness for 30 seconds and change back to 5%.
For all modes except HL + SEN, you can adjust the brightness 50%-40%-30%-20%-15% by pressing the up and down arrow buttons on the remote.
MPN: MSL213
*depending on the environment and other factors.