Martec Phoenix Mini 3 in 1 Modern Bathroom Solution. The smaller, more compact version of the best selling, big brother regular ‘Phoenix’.
Seen as a natural successor to the Martec Linear Mini, the Martec Phoenix Mini uses newer LED lighting technology and has a more modern look, as well as being offered at a better price. It’s the mini version of the regular Phoenix!
Modern slimline linear design bathroom 3-in-1 with a sleek black trim finish. Featuring a next generation ultra-quiet 60w ball bearing exhaust fan to create one of the quietest but best performing exhaust fans on the market, boasting a very high airflow extraction rate of up to 420m³/hour to keep your bathroom fresh and well ventilated. Wall controller with 3 switches included for separate heat, light and fan control.
Featuring instant halogen heat from the 1000W R7 central heat lamp and up to 800 lumens from the advanced energy efficient Tri-Colour 10w LED panel, which will light up your whole bathroom. The LED light is Tri-Colour selectable, meaning that the fitting has Warm White (3000K), Cool White (4000K) or Daylight (5000K) all built into one!
This fitting is suitable for bathrooms of all sizes.
Electrician friendly design incorporates a side-entry duct (ø125mm) for easier installation and improved air extraction performance. Cut out template is included. Heavy duty housing provides market leading durability.
Comes with a 3 year in-home (parts and labour) warranty.
Dimensions:
Face: 440 x 350mm
Unit depth: 210mm (minimum ceiling depth of 220mm is required)
Cut out size: 390 x 325mm
Full Specifications:
– 3 in 1 Mini Bathroom solution – Heater/Exhaust Fan/LED Light
– 1 x 1000w R7 linear heat lamp for instant heating
– 10w LED light: 800 lumens, Tri-Colour selectable
– Light output can be adjusted between Warm White (3000K), Cool White (4000K) and Daylight (5000K)
– High air extraction up to 420m³/hour
– Super quiet 60w ball bearing exhaust fan motor
– Thermal cut out and overheating protection for safety
– Side entry draft stopper and 1.5m, ø125mm flexible duct included, exterior grille
– Wall controller with 3 switches included for separate heat, light and fan control
– Cutout template included
– 3 Year in-home (parts and labour) warranty
– Face: 440 x 350mm
– Unit depth: 210mm (minimum ceiling depth of 220mm is required)
– Cut out size: 390 x 325mm
MPN:
Black – MBHPM1000M
White – MBHPM1000W
Note: with any of our bathroom 3-in-1 heater/light/fan products, we do not recommend installing them directly over or close to the shower, doing so greatly increases the chance of water ingress to the LED light and risking light failure. Unfortunately we cannot offer warranty for fittings installed directly over or very close to the shower zone. Do not install them in this scenario.