Mercator Defender 10w LED Solar DIY Flood Light with Motion Sensor.
Being portable, the Defender can be used not only as a permanent flood light, but also a handy temporary light for camping, outdoor parties and other uses where easy light is required.
DIY (do-it-yourself installation) Solar LED Floodlight. Features a large Poly-Crystalline Silicone Solar Panel powering an efficient 10w LED panel with a built-in motion sensor. LED panel produces a wide 90° beam angle of light and up to 5–6 hours of full brightness on full charge.
On full brightness, the Defender produces up to 1080 lumens worth of light!
IP65 weatherproof rated, meaning the Defender is built to withstand full exposure to the weather.
$0.00 running costs.
Built-in PIR security motion sensor can activate the light when movement is detected at night time. Sensor has a 6 metre long and 120° wide detection range, and has a manual-override feature, allowing the user to bypass the sensor and keep the light on if necessary (called constant light mode).
DIY installation – no electrician required.
Also included in the box is an additional mounting bracket, which can be used to mount the defender on a 4-6cm diameter pole/bar.
The Mercator Defender 10w comes with a 3 year replacement warranty.
• DIY installation- no electrician required
• Wattage- 10w
• Colour- Black
• Colour Temp- 4000K (neutral white light output)
• Lumens- 1080lm on full brighness
• Beam angle- 90°
• Battery life on full charge – 5-6 hours of full brightness
• 3 year replacement warranty
• DIMENSIONS: Length: 27.5cm / Height: 19.5cm / Width: 3.5cm
– Detection range- 1-6m, 120 degrees
– 2 modes: sensor mode and constant light mode (manual override feature)
– Built in daylight sensor to ensure light does not operate during daylight hours
Mode 1 – Default Sensor Mode
(Battery Capacity Above 30%)
Light turns on to full brightness when motion is detected. After 20 seconds of no motion detected, light dims to low brightness
(Battery Capacity Below 30%)
Light turns on to full brightness when motion is detected. After 20 seconds of no motion detected, light turns off
Mode 2 – Constant Light Mode (Manual Override)
Press power button for 3 seconds. Light will turn on to full brightness and stay on until battery capacity reduces to zero.
Product code: MXS4410