Twin Pack Kit 2 x Mercator Apollo CCT 9w LED Downlight + Surface Socket Plug Base Outlet
Available here as a COMPLETE Downlight with Surface Socket Outlet package deal to help you save!
You are buying a pack of 2x downlights with 2x plug bases at a time.
Mercator Apollo 9w LED downlight with CCT switch and Dimmable integral driver.
Features an LED colour temp changing dip switch located on the back of the downlight, allowing users to flick between Warm White, Neutral White and Cool White/Daylight. Round white fascia with recessed frosted diffuser. IP44 rated, allowing for use in wet areas such as bathrooms and outdoor undercover areas. Standard 90mm round cutout required. Dimmable with most leading edge and trailing edge dimmers. High 85+ CRI (colour rendering index), unlike many other budget downlights!
Each unit comes with the downlight and 60cm flex and plug.
IC-4 rated allowing for covered and abutted to insulation use.
COMES WITH A 5 YEAR AUS-WIDE WARRANTY
CHOOSE FROM 3 POPULAR LIGHT SETTINGS:
With a flick of the dip switch on the back of the downlight you can choose the desired light setting in each room of your house.
WW- Warm White, 3000K- eg. Living rooms, bedrooms
NW- Neutral White, 4000K- eg. Hallways, kitchens
CW- Cool White/Daylight, 5000K- eg. Laundries, bathrooms
This combo pack includes a surface socket outlet for each downlight!
WHY USE SURFACE SOCKETS?
Surface Socket outlets make installation/uninstallation of fittings (such as LED downlights) much easier. Essentially, having a surface socket installed turns light fittings that come with flex and plugs (such as the Apollo downlight) into 'plug and play' fittings, meaning that you do not need an electrician to install/uninstall a light fitting on that particular point in the future.
For example, if your electrician installs surface sockets at each downlight location in the ceiling, each LED downlight simply plugs into a surface socket and everything tucks away neatly. In the future, if you need to replace the downlights, you simply remove the downlight from the ceiling cutout, unplug the downlight from the socket and then plug in the new unit - electrician free, saving you time and $$$!
Surface Socket Plug Outlet Specs: 240v, 10Amp, 3 pin.
- Cutout required: Ø90mm
- Voltage: 220-240V ~ 50Hz
- Power consumption: 9w
- Light colour options: Warm White | Neutral White | Cool White
- Lumen output: 750lm | 800lm | 850lm
- Colour Temp: 3000K | 4000K | 5000K
- Beam angle: 100°
- Dimmable: Yes- leading and trailing edge
- Warranty: 5 years
- CRI: 85+
- IP rating: IP44
- IC rating: IC-4
Cutout- Ø90mm diameter
Fascia- Ø103mm diameter
Unit depth- 55mm